ALAMO XTEN-A-KUT II

✨ New: Multi-Enquiry Feature

Submit your email enquiry, then send it to similar listings with just a click!

Phone

Contact Seller

Phone: ** **** *076
✨ New: Multi-Enquiry Feature

Submit your email enquiry, then send it to similar listings with just a click!

Email Advertiser:

For security reasons, do not select "Remember my details" if you are using a shared computer.
View our privacy policy, collection notice and terms and conditions to understand how we use your personal information.

Dealer

INTERNATIONAL MOWERS

22 Hydrive Close

Dandenong South, VIC

INTERNATIONAL MOWERS Visit website

Features

Title ALAMO XTEN-A-KUT II
Make ALAMO
Price POA
Listing Type New
Stock Number S61
RefCode TA542755

Description

The EXTEN-A-KUT® II offset mower is designed for cutting grass, weeds, and brush up to 1″ in diameter along road-sides, ditch-banks, and other hard-to-reach areas including pond and creek banks. The hydraulically-powered arm can extend the mowing head out 12-feet, 6-inches from the tractor center-line. Being hydraulically-driven, there are no mechanical drive-lines, belts, pulleys, U-joints, or complicated drives. The hydraulic system is powered by a gear pump operating at 39-gallons-per-minute at 540 PTO, which will provide the power you need in tough mowing situations. The operating range of the cutting head is 85-degrees up and 70-degrees down allowing the operator to mow in many different circumstances that are impossible with ordinary mowers. Counterweight is provided with a 60-gallon hydraulic reservoir tank. The large hydraulic oil tank will also permit the system to run cooler in rough mowing conditions. Recommended tractor size is 60-HP, however a 45-HP tractor may be used with ample front-end counterweight.

MOUNTING:
The EXTEN-A-KUT II mounts to the tractor using the CAT II three-point hitch. A tractor size of 60-HP is recommended. A smaller tractor with 45-HP may be used, however ample front-end counterweight will be required.
CUTTING HEAD:
The cutting head has a mowing swath of 59-3/4″. It will cut through up to 1″ diameter vegetation and is adjustable from 3-1/4″ to 9-1/2″ with adjustable tailwheel. The overall width of the mower is 67-1/2″ and the height is 22-3/4″. The blade is a single spindle blade with clockwise rotation. Available with a bar or pan blade carrier, the blade length from pin center to tip is 18-1/8″. The top deck is constructed using 10-gauge steel. The mower has a tilt angle of 85-degrees up through 70-degrees down. Front and rear deflector flaps are standard.

ARM EXTENSION:
The EXTEN-A-KUT II arm can extend the mower head out to a maximum of 12-feet, 6-inches from the center-line of the tractor.

HYDRAULIC PUMP:
The hydraulic pump is gear-type with an operating pressure rating of 2,500 PSI. The pump operates at 39 GPM at 540 PTO which provides a blade tip speed of 22,220 FPM.

HYDRAULIC MOTOR:
The hydraulic motor is also gear-type with a 2,500 PSI relief setting. The unit is equipped with a 1″ diameter pressure and return hose and a 1-1/4″ diameter suction hose. The EXTEN-A-KUT II uses a 60-gallon hydraulic reservoir tank which will allow the unit to run cooler in tough mowing conditions and also provides counterweight.

OTHER OPTIONAL EQUIPMENT:
Available in 540 or 1000 PTO; CAT II or III quick coupler; Replaceable skid shoes; 4″ x 8″ Tailwheel; Front-end counterweight; Front and rear chain guards