MCCONNEL POWER ARM 3530

• Overview

3.7m reach
Left hand or Right hand build option
Low power requirement
Front mounted
Three-point linkage-mounting system
Parallel arm geometry
Hydraulic safety breakaway
High performance hydraulic system
Folding flat arms for transport
Storage support legs
Operator friendly
Markets
Horticultural/ landscape
Groundcare/ amenity
Governmental
Contractors

Tractor Requirements 1300kg minimum tractor weight
35hp minimum tractor horsepower

Features

Lift Float Kit

The McConnel lift float kit enables the Flailhead (or other attachments) to automatically follow the contours of the ground in a vertical plane. Ideally suited for verge mowing the lift float kit greatly reduces the need for operator input. Activating the Lift Float mode is done via the in-cab Power Arm controls.

Angle Float Kit

McConnel Angle float kits are fitted to all Power Arms with electric controls as standard. It enables the Flailhead (or other attachments) to automatically follow the contours of the ground in a horizontal plane. Ideally suited for verge mowing the Angle float kit greatly reduces the need for operator input. Activating the Angle Float mode is done via the in-cab Power Arm controls.

Parallel Arm Geometry

This feature enables the operator to adjust the reach of the machines arms, without the need to continuously adjust the 'lift' service in order to compensate for the change in head pivot height - as would be the case with conventional arm geometry.

Safety Breakaway

All McConnel Power Arms incorporate a safety breakaway system that provides protection to the Power Arm and cutting attachment. Non Power Slew models use a mechanical system which allows the dipper arm to break back when the arms or cutting attachment comes into contact with a foreign object. Power slew models work in the same principle but break back movement comes via the slew ram.

Maximum Reach 3.7m

Machine Weight* 400kg

Power Arm Horsepower 30hp

Oil Tank Capacity 55ltr

Hydraulics Gear Semi Independent

Optional Gear Totally Independent

Optional Piston Hydraulics

Attachment Method 3-point Linkage