OTHER ROTATING WEED WIPERS 9'6" COVER for sale POA

It reaps all kinds of feed plants, grass, meadow grass, heath and wild plants bordering the roads with blades rotating at a high annulus velocity and existing in both of the 2 drums rotating reversely to each other and leaves them behind in the form of barrel. With the advantage of adjustable cutting height and the high quality of the cutting height, the nutrient values of the plant are preserved and drying is made possible in a short time. With its little power requirement, it operates in a high-quality manner without tiring the tractor. The belts are tightened by means of a spring and thus the safety is ensured on the pulley mechanism. Its adaptation to the unevenness of the ground is highly successful. Specifications: T-TCBM 1900 Working Width: 1900 mm Transport Width: 1500 mm Overall Height: 1035 mm Number Of Drums: 2 Number Of Blades: 6 Optimal Working Speed: 5-7.5 kmph Capacity: 7.5-11.5 HA Per Hour Machine Weight: 485 kg PTO Requirement: 540 rpm Required Tractor HP: 50 HP FarmTech represent Minos Agri (Turkey) as their national distributor in Australia should you prefer to buy this machine through your local dealer, you can do that too, just ask! Contact FarmTech today for sales or more information.

Minos Rotary Disc Mower is the MOST IDEAL machine type especially for the feed plants growing horizontally such as vetch, white clover, Lotus corniculatus and for reaping all kinds of meadow, pasture and feed plants and wild plants with the effect of the air current formed during the rotate of the discs. It is driven by the tractor tail spindle and connected to it with three point hitch system. The movement is transmitted serially through its four fold belt pulley. The machine has 4-5-6 disc models. It has a safety mechanism against the damage which may occur if it hits a hard and big object (tree, stone, etc). It reduces the damage to a minimum by moving backwards when it hits an object. The Disc Drum Mower rises up by hydraulic system. So the machine stays behind the tractor in transport position. Grass-cutting is performed on sloppy grounds after the machine is made suitable to the slope through the hydraulic piston. The grass that has been cut can be picked according to the desired sizes by the direction changer part that is connected to the rear part of the machine. It provides a very low and high-quality cutting on the evened ground where it leaves spread the grass it has reaped with its high-quality cutting by leaving a one-type stubble. Specifications: T-DCBM 6 Working Width: 2386 mm Transport Width: 1260 mm Overall Height: 3150 mm Number Of Discs: 6 Number Of Blades: 12 Optimal Working Speed: 5-6 kmph Capacity: 10-12 HA Per Hour Machine Weight: 475 kg PTO Requirement: 540 rpm Required Tractor HP: 60 HP FarmTech represent Minos Agri (Turkey) as their national distributor in Australia should you prefer to buy this machine through your local dealer, you can do that too, just ask! Contact FarmTech today for sales or more information.

Near new Krone AM283S 3PL mower. 2.8mt Working width with 7 Disc Cutters. Standard safety breakaway. Direct drive system does not utilize belts. Call Andrew on 0456 811 005 to discuss..