STEFFEN SYSTEMS HIGH DENSITY BALE PRESS for sale POA

Hay Tools / Rectangular Balers

steffen systems high density bale press 163441 001 steffen systems high density bale press 163441 002
steffen systems high density bale press 163441 003 steffen systems high density bale press 163441 004
steffen systems high density bale press 163441 005 steffen systems high density bale press 163441 006
steffen systems high density bale press 163441 007 steffen systems high density bale press 163441 008
steffen systems high density bale press 163441 009 steffen systems high density bale press 163441 010
steffen systems high density bale press 163441 011 steffen systems high density bale press 163441 012
steffen systems high density bale press 163441 013 steffen systems high density bale press 163441 014
steffen systems high density bale press 163441 015 steffen systems high density bale press 163441 016
steffen systems high density bale press 163441 017 steffen systems high density bale press 163441 018
steffen systems high density bale press 163441 019 steffen systems high density bale press 163441 020
steffen systems high density bale press 163441 021 steffen systems high density bale press 163441 022
steffen systems high density bale press 163441 023 steffen systems high density bale press 163441 024
steffen systems high density bale press 163441 025 steffen systems high density bale press 163441 026
CALL 03 8547 8478
Title STEFFEN SYSTEMS HIGH DENSITY BALE PRESS
Make STEFFEN SYSTEMS
Price POA
Listing Type New
Stock Number PRESS
Refcode TA481542
Minimum Tractor PTO - kw 0

The process starts with an automated feed table on which the loader operator places the incoming big bales. The machine accepts both 3x3 and 4x3 big bales. This table then advances the big bales into the cutter box which tilts them on their edge to allow for the proper cut. Once the bale has been sliced into sections of 16 x 35, the bottom slab is slid over, allowing the next slab to fall down behind. These slabs are then pushed forward into the weigh chamber while the operator removes the old twines. Here the simple adjustable beam scale determines the proper amount of hay, which is sectioned off by the feed forks. At this time, the weighed slab is split and advanced onto the lift table.

The lift table then raises the slab into the actual compression chamber. The main compression ram now applies pressure against the slab reducing its length to either 24 or 18 depending on the selection made for the finished bale length. Once compressed, the eject cylinder forces the bale horizontally into the banding chamber. The bale is held with two steel plates, while the banding unit places bands transversely along its width. The number of bands is selectable, but normally would be six.



Once this process is complete, the next bale extrudes the finished banded bale out and it expands to its finished length of 24 or 30, depending on the selection, then is fed into the secondary cutting box. This cutter slices the bales from one 16 x 36 into two 16 x 18 bales. After slicing, the bales are fed into the accumulation stacking table which groups them into proper configurations for mechanically handling into storage or onto a trailer. The entire process happens in approximately 30 seconds with the standard machine, or 15 seconds with the higher power option.

The power for this operation comes from an electric driven hydraulic power station consisting of multiple 30 hp motors, each driving hydraulic pumps. The automation is controlled by a PLC (programmable logic controller), with full operator manual overrides. All manual functions are protected by the PLC to prevent operator damage. All necessary guarding is supplied and safety shutdowns and lockout systems are integrated via the PLC.

The information contained within classified listings on TradeFarmMachinery.com.au is generated by the private and dealer advertisers. Please confirm listing details including price and specifications directly with the seller.

Related Articles

NSW truck repairers join trucking drought action

AHVRA joins Motor Traders’ Association and many others to ease farmers’ plight +more

Product Focus: Case IH LB434S XL baler

Victorian farmer Scott Somers definitely took a stab in the dark when he purchased a new Case IH baler despite never using one before +more

Review: Enorossi Enopack 900 | Full Test & Specs

On the face of it the Enorossi Enopack 900 is like any other small square baler, but it soon becomes apparent that this is a next-level machine. +more

CALL 03 8547 8478
Email Dealer
Dealer Address
Tenpack

Goornong, VIC, 3557
Australia