New and Used Claas Tractors For Sale in Australia

The rigid chisel plough is used in a similar fashion to the stump jump as a primary cultivator. The rigid tine is harder to pull as it has not got the jack hammering effect of the stump jump tine. It should also be used in country which is known to be clean, as the tine is clamped onto the frame and will only shear the clamp bolts under load.

The CZ-M Chisel Plough is available with 5, 7, 9 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines. Since it swells the soil without turning over it, decomposition of organic materials is too slow and damp soil is not removed to the top. Since stubble and plant residuals scratch the surface, a good upper layer composes. It is very effective against weeds that are robust and develop roots. It can be used successfully in heavy soils where other materials are insufficient in terms of quality and capacity. While chisel swells the soil in ploughing depth and stubble stays on the land surface, it provides a protective impact against water and wind erosion. If the soil is wet and damp, it should be avoided to use this tool. The main functions of these chisel type ploughs are breaking hard bottom soil which is formed by ploughing and processing soil without tipping and airing. In case of sudden pressure, safety pins come into action and prevent the tractor and chassis from damaged. Tines are designed to get the maximum output from your tractor by giving them the most appropriate submersion angle. Specifications - CZ-11-M Number Of Tines: 11 Angle Of Penetration: 30 Degrees Total Height: 1300mm Working Depth: 150-350 mm Furrow Distance: 275 mm Working Width: 275cm Machine Weight: 770kg Required Tractor Power: 90-100 HP Machine/Equipment base price only, additional price for optional extras. We can deliver this machine Australia wide, just ask us for a delivered price. Prefer to buy this machine through your local dealer? You can do that too, just ask! Contact FarmTech today for sales or more information.

Farm Aid coil tine tillers are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials. No corners have been cut in their construction, they are built to serve and built to last! 5ft Pictured (with 5 Tines)

Grizzly Deep Digger Ripper, trailing, V-Ripper, 9 tyne, 500mm spacing, 4.5m working width

Farm Aid coil tine tillers are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials. No corners have been cut in their construction, they are built to serve and built to last! 5ft (5 Tines) Pictured

John Deere 712 Mulch Tiller, trailing, 13 tyne, 4 metre coverage, disc and tyne

The stump jump chisel plough is an ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard.

The CZ-M Chisel Plough is available with 5, 9, 11 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines. Since it swells the soil without turning over it, decomposition of organic materials is too slow and damp soil is not removed to the top. Since stubble and plant residuals scratch the surface, a good upper layer composes. It is very effective against weeds that are robust and develop roots. It can be used successfully in heavy soils where other materials are insufficient in terms of quality and capacity. While chisel swells the soil in ploughing depth and stubble stays on the land surface, it provides a protective impact against water and wind erosion. If the soil is wet and damp, it should be avoided to use this tool. The main functions of these chisel type ploughs are breaking hard bottom soil which is formed by ploughing and processing soil without tipping and airing. In case of sudden pressure, safety pins come into action and prevent the tractor and chassis from damage. Tines are designed to get the maximum output from your tractor by giving them the most appropriate submersion angle. Specifications - CZ-7-M Number Of Tines: 7 Angle Of Penetration: 30 Degrees Total Height: 1300mm Working Depth: 150-350 mm Furrow Distance: 275 mm Working Width: 175cm Machine Weight: 550 kg Required Tractor Power: 75-80 HP Machine/Equipment base price only, additional price for optional extras. We can deliver this machine Australia wide, just ask us for a delivered price. Prefer to buy this machine through your local dealer? You can do that too, just ask! Contact FarmTech today for sales or more information.

Used Gason 13 Tyne Chisel Plow

Agrowplow 21 tine, Frame width 9m, hydraulic breakout, it has had some recent work done to it. Located Near North Star. Call Dom 0400 - 582 - 092.