Farm Machinery

Price Range
Recently Listed
Seller Location
Radius (km)

Listing Type:

Year
-
Find Dealers
Seller Location
Radius (km)
Dealer Name or Keywords

John Berends Tillage And Seeding Equipment For Sale

Trade Safely. Use our anti-scam guide to protect yourself.

49 result(s)
Sort by

show

results

  • RefCode: TA884678
  • Class: Offset Discs

Berends GM40 Linkage Offset Discs - Heavy Duty. 18 Plate GM40 - 22in x 5mm scallop discs This Gibbins Rawlings machine is a heavier duty version of the Berends linkage model. It is ideal for all types of terrain however it is most commonly used in market gardens, orchards and for firebreaks, where the operator wants the strength and weight of a large disc but the versatility and compactness of a linkage model. Using solid cast iron disc spools instead of pipe spacer spools almost doubles the weight of the machine. Each spool is individually machined and by providing the weight in the gangs rather than on the frame (or ballast) reduces the load onto the bearings. More weight also means a better penetration in hard ground. The spools also have a different diameter at the points where they touch the discs. This means that the disc doesnt have a pinch point where the spool on either side of it touch in the same place. This reduces the stress on this part of the disc when it is under load (during cultivation) compared to machines which run a straight spool between the discs. The main frame and headstock is also much heavier. The headstock is supported by two spring loaded pressure screws which help prevent damage in rocky or undulating conditions. Berends use shorter axles on the heavier disc ploughs, which means more bearing support. This may cost more to produce but it provides a stronger set-up in hard going. The standard set-up for an offset discs is the front gang running at a 21 angle whilst the rear gang is set at 23. There is an art to setting up a disc, but if you have lateral and full angle adjustment - as these discs have - you are able to set a disc to give a level finish. Features: Each machine takes approximately 2-3HP per disc to pull, depending on conditions. Prong scrapers are also available for heavy clay soil Twin spring loaded pressure screws prevent damage in rocky or undulating conditions Easy gang angle adjustment Fitted with hard wearing European Bellota Boron discs at 9 spacing Available in 22x5mm(or optional 24x5mm sizes) Cat 1 & 2 linkage 28mm square high tensile axles Optional prong scrapers Greaseable flanged disc bearings with excellent sealing to exclude contaminants Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings. Model: 0810 - 18 Plate GM40 - 22in x 5mm scallop discs - $7,524.00 Options: 0947 - Optional Scrapers suit 18 plate GM40 - $566.50 0953 - Optional Furrow filler (not sold separately) - $229.90 *Upgrade to 24" x 5mm discs available - POA Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA920614
  • Class: Offset Discs

Berends RM75 Trailing Offset Discs - Heavy Duty 20 Plate RM75 - 24in x 6mm scallop discs The RM 75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60HP - 130HP tractors. Features: Heavily weighted discs 40mm square high tensile axles Fitted with 24 x 5 or 6mm discs or 26 x 6mm discs Solid cast spools provide 1575kg to 2510kg in weight Standard with prong type scrapers Hydraulic lift wheel kit. Model: 0841 - 20 Plate RM75 - 24in x 6mm scallop discs - $14,910.50 Options: 0951 - Optional jack - $104.50 0953 - Optional Furrow filler (not sold separately) - $229.90 *All RM75 trailing discs are fitted standard with scrapers and hydraulic lift. Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA917584
  • Class: Land Planes

Grader Blades - Extra Heavy Duty Starting from $3,729.00 One of the strongest mechanical grader blades on the market. You cannot buy better value! Features: Fitted with high tensile 66mm main pivot pin. Main and tilt pivots sleeved and grease-able for ease of operation, strength and reduced wear. Extensive use of high tensile steels for extra strength in high stress areas. 24 angle positions with adjustment from tractor seat. Offset 3 positions to both right and left allowing blade to work outside the wheel even at an angle. Blade rotates 360 degrees for forwards and backwards operation. Easy to adjust ratchet tilt function as standard. By having the tilt function below the turntable, the tilt angle is allowed to remain constant even when fully offset and ensures no decrease in tilting angle if the blade is offset. Optional hydraulic available. Curved 10mm mouldboard for strong cuts at the correct angle and high clearance for greater capacity. Optional Holden depth wheel with either manual ratchet or hydraulic adjustment. Hardened reversible cutting edge. Over 400kg weight. Available in 7ft (2.1m) and 8ft (2.4m) widths. Suitable for tractors 60-120 HP. Models: 0039 - 7ft Grader Blade - Extra Heavy Model - $3,729.00 0040 - 8ft Grader Blade - Extra Heavy Model - $3,905.00 Options: 0041 - EH Hydraulic tilt option - in lieu of ratchet - $583.00 0042 - EH Hydraulic tilt option - as spare part - $660.00 0026 - Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link - $649.00 0027 - Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses - $1,094.50 Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA917586
  • Class: Land Planes

Grader Blades - Heavy Duty Starting from $2,255.00 Heavy duty strength at a light duty price. Features: Fitted with high tensile 50mm main pivot pin to minimise wear and tear and avoid breakage. 24 angle positions to both right and left allowing blade to work outside the tractor wheel, even at an angle. Blade rotates 360 degrees allowing forwards and backwards operation. Adequate tilt via the linkage pin position and tractor levelling box. Curved 10mm thick mouldboard for strong cuts at the correct angle and high clearance for greater capacity. Hardened, reversible cutting edges (as used on road graders). Optional Holden depth wheel (at additional cost) with either manual ratchet or hydraulic adjustment. Available in 6ft (1.8m), 7ft (2.1m) and 8ft (2.4m) widths. 12 Month Warranty against faulty materials or workmanship. Models: 0035 - 6ft Grader Blade - HD Model - $2,255.00 0036 - 7ft Grader Blade - HD Model - $2,519.00 0037 - 8ft Grader Blade - HD Model - $2,772.00 Options: 0026 - Wheel kit suit Hyd/EH/HD G.Blade, Manual ratchet link - $649.00 0027 - Wheel kit suit Hyd/EH/HD G.Blade, Hydraulic c/w Rams & Hoses - $1,094.50 Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA884684
  • Class: Disc Ploughs

Berends Merbein Ploughs Available in 2 disc and 3 disc units for either side - If using only one unit on a toolbar it is recommended that a rear coulter is fitted. 6ft, 7ft and 8ft Toolbars. Plough assemblies adjustable for width along the toolbar to either mound beds or reversed to form shallow channels. Should be operated in cultivated soil. Available Options: 0520 - 2 disc merbein plough 0522 - 3 disc merbein plough 0536 - Merbein rear coulter 0528 - 6ft (1.8m) merbein toolbar 0530 - 7ft (2.1m) merbein toolbar 0532 - 8ft (2.4m) merbein toolbar All prices include GST. Please allow extra fro freight ex Vic. Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA920629
  • Class: Offset Discs

Berends Linkage Offset Discs - Medium Duty 16 Plate - 22in x 5mm scallop discs These medium duty offset discs are designed for small to medium size tractors. They are fitted with 28mm (1 1/8) square high tensile gang bolt axles and high quality triple sealed bearings. The 10, 12, 14 and 16 plate machines have four bearings whilst the 18 plate has 6 bearings. The 10 and 12 plate models are supplied with a single boom main frame with a support bar between the gangs whilst the 14-18 plate are supplied with a double boom main frame. Adjustment is very simple, the U bolts which clamp the gangs on are simply loosened and the gangs can be adjusted laterally and for angle. The standard set-up for an offset discs is the front gang running at a 21 angle whilst the rear gang is set at 23. There is an art to setting up a disc, but if you have lateral and full angle adjustment - as these discs have - you are able to set a disc to give a level finish. Features: Disc type Scalloped Boron Coated 1 1/8 (28mm) square high tensile axles Triple sealed bearings 10 and 12 plate models on single bar frame and 14 to 18 plate models on double bar frame. Model: 0250 - 16 Plate - 22in x 5mm scallop discs - $3,619.00 Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA920613
  • Class: Offset Discs

Berends RM75 Trailing Offset Discs - Heavy Duty 22 Plate RM75 - 24in x 6mm scallop discs The RM 75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60HP - 130HP tractors. Features: Heavily weighted discs 40mm square high tensile axles Fitted with 24 x 5 or 6mm discs or 26 x 6mm discs Solid cast spools provide 1575kg to 2510kg in weight Standard with prong type scrapers Hydraulic lift wheel kit. Model: 0845 - 22 Plate RM75 - 24in x 6mm scallop discs - $16,533.00 Options: 0951 - Optional jack - $104.50 0953 - Optional Furrow filler (not sold separately) - $229.90 *All RM75 trailing discs are fitted standard with scrapers and hydraulic lift. Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA879588
  • Class: Offset Discs

John Berends TH 100 Trailing Tandem Discs - Heavy Duty (hydraulic folding). Starting from $33,286.00. Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m. Available Options: 0972 28 Plate TH100 - 24in x 6mm scallop discs - $33,286.00 0973 32 Plate TH100 - 24in x 6mm scallop discs - $35,629.00 0974 36 Plate TH100 - 24in x 6mm scallop discs - $37,972.00 0975 40 Plate TH100 - 24in x 6mm scallop discs - $40,326.00 0976 44 Plate TH100 - 24in x 6mm scallop discs - $42,680.00 0977 48 Plate TH100 - 24in x 6mm scallop discs - $44,990.00 Price is ex-Dandenong. All prices include GST. Contact Farm Supplies today for sale or more information! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA920624
  • Class: Offset Discs

Berends Linkage Tandem Discs - Heavy Duty TH30 20 Plate TH30 - 22in x 5mm scallop discs Strong compact tandem disc ideal for vineyards, orchards and horticulture. Tandem set-up is easier to pull as there is little sideways drag. Features: Easy ratchet gang adjustment Solid cast spools Triple sealed greaseable bearings Optional scrapers available. Model: 0815 - 20 Plate TH30 - 22in x 5mm scallop discs - $10,241.00 Options: 0948 - Optional Scrapers suit 20 plate TH30 - $660.00 Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Contact Farm Supplies today for sale or more information! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
  • RefCode: TA920628
  • Class: Offset Discs

Berends Linkage Offset Discs - Medium Duty 18 Plate - 22in x 5mm scallop discs These medium duty offset discs are designed for small to medium size tractors. They are fitted with 28mm (1 1/8) square high tensile gang bolt axles and high quality triple sealed bearings. The 10, 12, 14 and 16 plate machines have four bearings whilst the 18 plate has 6 bearings. The 10 and 12 plate models are supplied with a single boom main frame with a support bar between the gangs whilst the 14-18 plate are supplied with a double boom main frame. Adjustment is very simple, the U bolts which clamp the gangs on are simply loosened and the gangs can be adjusted laterally and for angle. The standard set-up for an offset discs is the front gang running at a 21 angle whilst the rear gang is set at 23. There is an art to setting up a disc, but if you have lateral and full angle adjustment - as these discs have - you are able to set a disc to give a level finish. Features: Disc type Scalloped Boron Coated 1 1/8 (28mm) square high tensile axles Triple sealed bearings 10 and 12 plate models on single bar frame and 14 to 18 plate models on double bar frame. Model: 0252 - 18 Plate - 22in x 5mm scallop discs - $4,433.00 Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

CALL 07 3085 2777
49 result(s)
Sort by

show

results

TradeFarmMachinery.com.au is the home of Farms & Farm Machinery magazine and has over 40,000 new and used agricultural machinery items for sale across a wide range of farming categories including agricultural parts, tractors, UTVs/ATVs, seeder drills, sheds, spreaders, tillage & seeding, backhoe loaders, mini tractors, sub-compact tractors and more.

The information contained within classified listings on TradeFarmMachinery.com.au is generated by the private and dealer advertisers. Please confirm listing details including price and specifications directly with the seller.