Tillage And Seeding Equipment For Sale from $5,000 to $10,000

Berends GM40 Linkage Offset Discs - Heavy Duty. 18 Plate GM40 - 22in x 5mm scallop discs This Gibbins Rawlings machine is a heavier duty version of the Berends linkage model. It is ideal for all types of terrain however it is most commonly used in market gardens, orchards and for firebreaks, where the operator wants the strength and weight of a large disc but the versatility and compactness of a linkage model. Using solid cast iron disc spools instead of pipe spacer spools almost doubles the weight of the machine. Each spool is individually machined and by providing the weight in the gangs rather than on the frame (or ballast) reduces the load onto the bearings. More weight also means a better penetration in hard ground. The spools also have a different diameter at the points where they touch the discs. This means that the disc doesnt have a pinch point where the spool on either side of it touch in the same place. This reduces the stress on this part of the disc when it is under load (during cultivation) compared to machines which run a straight spool between the discs. The main frame and headstock is also much heavier. The headstock is supported by two spring loaded pressure screws which help prevent damage in rocky or undulating conditions. Berends use shorter axles on the heavier disc ploughs, which means more bearing support. This may cost more to produce but it provides a stronger set-up in hard going. The standard set-up for an offset discs is the front gang running at a 21 angle whilst the rear gang is set at 23. There is an art to setting up a disc, but if you have lateral and full angle adjustment - as these discs have - you are able to set a disc to give a level finish. Features: Each machine takes approximately 2-3HP per disc to pull, depending on conditions. Prong scrapers are also available for heavy clay soil Twin spring loaded pressure screws prevent damage in rocky or undulating conditions Easy gang angle adjustment Fitted with hard wearing European Bellota Boron discs at 9 spacing Available in 22x5mm(or optional 24x5mm sizes) Cat 1 & 2 linkage 28mm square high tensile axles Optional prong scrapers Greaseable flanged disc bearings with excellent sealing to exclude contaminants Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings. Model: 0810 - 18 Plate GM40 - 22in x 5mm scallop discs - $7,524.00 Options: 0947 - Optional Scrapers suit 18 plate GM40 - $566.50 0953 - Optional Furrow filler (not sold separately) - $229.90 *Upgrade to 24" x 5mm discs available - POA Price is ex-Dandenong. All prices include GST. Dealer enquiries welcome. Finance is now available! Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE...

The Alfa seedbox is a seeder with a distributed sowing system, designed for sowing seeds simultaneously with stubble cultivation or after ploughing. Seeds are implemented into the soil by throwing between tillage section and packing section (roller) of the tillage machine. Material metering is made mechanically by the grooved sowing apparatus and material goes into the sowing lines connected with a spool installed before the roller. * Mounted on skimming units, cultivators and disc harrows * Universal grooved sowing apparatus * Simple adjustment of seed dose * Can be mounted on the tractor front threepoint linkage/hitch or to the support frame Specifications - 280 Working Width: 4100 mm Discharge Elements: 11 Volume: 280 L Weight: 310 kg We can deliver this machine Australia wide, just ask us for a delivered price. FarmTech represent UNIA (Poland) as their national distributor in Australia should you prefer to buy this machine through your local dealer, you can do that too, just ask! Contact FarmTech today for sales or more information

Heavy Duty Korean Quality Rotary Hoe Emu ER5220SC Mounting on 70-120Hp Tractor Low load blade arrangement to increase soil fluidity Optimised for high load working Adopting special material blade and blade shaft High strength frame maindeck structure (all galvanised) SPECIFICATIONS: Model: ER5220SC Overall Width: 2490mm Overall Height: 1220mm Working Width: 2190mm Number of flanges (T): 9(14T) Number of blades (T): 54(8T) Height of PTO shaft: 735mm Blade shaft speed (rpm) at 540rpm PTO: 4 grades rotate 156, 175, 196, 219 Side drive: Gear Drive 3 Points Hitch: Cat II Working depth: 120~150mm Weight: 790kg Power: 80~90HP ***Pictures shown are illustrative only & may show optional extras.***...

Off set disc harrows mounted to tractor with three point linkage system (universal) and trailed by draw bar. Machine can be easily transported to the field.These disc harrows are used for chopping of stems and mixing with soil after harvesting. After using of plough, chisel and cultivators on the field, you can use this disc harrow for breaking of clods and crumbling of soils.These disc harrows are also used on all kinds of soils for making of seed bed, seedling bed, chopping of weeds, mixing of organic and inorganic fertilizers with soil and aeration as easily.Size of frame for this model is 80×80 mm and The number of discs is between 14-22 disc with sizes ; 460/510 and 560 mm high quality 52 HRC bororn steel.It has been used house bearings with conical bearings one side and ball bearing other side with high quality seals. It can be greaseable. Specifications - OD 1451 Number Of Discs: 14 Total Width: 1650 mm Total Length: 2280 mm Total Height: 1695 mm Height (Discs + Bar): 675 mm Working Depth Max: 220 mm Working Width: 1580 mm Disc Diameter: 510 mm / 20" Space Between Disc: 225 mm Number Of Berings: 4 Frame Size: 80 mm Required Power: 40-45 HP Weight: 450 kg We can deliver this machine Australia wide, just ask us for a delivered price. Prefer to buy this machine through your local dealer? You can do that too, just ask! Contact FarmTech today for sales or more information..